TowRig.com - Diesel Discussion and Tow Tech

Clutch giveaway from ValAir (ends April 30 2007)

Details:
ValAir would like to give a free clutch away to a member on TowRig.com for an honest review of their products. The winner must cover installtion, all parts will be at no charge including shipping.

Eligible candidates 5.9L cummins NV4500, NV5600, 6.9L, 7.3L Fords.

http://www.valairinc.com

Please reply if your interested along with what truck/tranny you have.

I am interested.

I have a 2002 Ram2500 QC SB CTD5.9HO 4x4 with a NV5600. Just turned over 100k with a new factory warranty IP and FLP. I run a full set of gauges and need to upgrade my clutch (and fuel lift pump) before punching up the power. I have been thinking about a SBC with upgraded pilot bearing.

Thanks for putting this possibility on the table for us.

Mark

I am definately interested. truck specs:2000 ford F250 7.3 6spd 2wd. Right now it just has superchips tuner, but I am stepping up to AFE stage 2, or equivalant, exhaust (thinking stacks, but nounderbed crossover available, so probably just a good 4-5" turbo back), edge juice w attitude, possibly turbo and/or Injectors, depending on how the business takes off this summer. truck has 109,000 I thinkit is second clutch. I use it to pull my 2000 Holidayrambler 30ft 5th wheel from WY to AZ and CA on vacation. It doubles as the wifes truck the rest of the year.
Darin

COOL!! waytogo

Sign me up please!

If I win I can install Crazy Larry! :)

2003 2500 dodge waytogo

2002 Dodge 3500 Dually
115,000 miles
NV5400 6 spd trans
5.9 Cummins HO
Edge Comp

I bought this in September of 2006 and don't know the condition of the current clutch. I pull a 10k pound trailer and would really like an upgrade in teh clutch department.

count me in wont be long my 04 will need one

1999 2500 dodge 5spd stage 4 jammer tst stackedwith a smarty

count me in too, figure if i keep getting in theese im bound to win soemthing lol plus i need to upgrade the clutch before anymore upgrades. my truck is in the signature below

'95 F350 with PSD here :pimp:
I figure the clutch won't last forever with the mods going in.

Too bad the 6.2/6.5 isn't in the offering.... I smashed the clutch out of it just last week. :doah:

Count me in, either my 551HP '03 dually with a 5600, or my '93 with a soon to be installed 4500, just recieved PODS yesterday and the usual pump mods, runs great now!

Im interested!
1998 dodge NV 4500

cont me in . If I win I will give my Clutch to my Bro Meseahunt2 . I have an auto and he has a stick. But Ill probly be the one putting it in for him anywaysrotfl

Count me in. I tow alot and would love some upgrades
2004.5 2500 Ram 5.9 CTD 600, 4x4, 6spd, man trans.

please count me in too.:rolleyes: yall have a good day

hey count me in, my old man has an 02 dodge with the six speed.

Thanks for the opportunity.


The puller
1974 C30 3+3 Dually, '94 cummins warmed up, nv4500.

97 12v CTD detuned currently because the stock clutch slips with my #100 fuel plate. Had to slide plate back to 3/4. Man though, in full forward I had to roll into it in every gear otherwise the smoke would bellow... from the tires and the clutch... My roomy has a video but can't find it, might have to slide it forawrd again and take another video.

I am very interested. In fact I am going to be needing to put in a clutch after I return from Afghanistan in September. I have a 1999.5 F350 Crew cab 7.3, 6 speed.

waytogo

04.5 ram with cummins and NV5600.

thanks for the chance and good luck to the rest
Grant

I would love to give you my honest opinoin of your clutch. I have a '01.5 Dodge H.O. cummins w/6-speed, edge juicew/attitude. I am currently rolling over 166,000 on the stock clutch. I haul with my truck every day. I have to pull 2 miles at 10% grade to get home every day, with a trailer tha grosses 10,000#. I think with the new programer i will be needing a new clutch.

Thank you,
Georgeburnout

Clutch giveaway from ValAir (ends April 30 2007)

Details:
ValAir would like to give a free clutch away to a member on TowRig.com for an honest review of their products. The winner must cover installtion, all parts will be at no charge including shipping.

Eligible candidates 5.9L cummins NV4500, NV5600, 6.9L, 7.3L Fords.

http://www.valairinc.com

Please reply if your interested along with what truck/tranny you have.Aloha Im interested,I have an 02 with a 5600 4x4 2500 .Thanks for the chance and take care.Mahalo Val Air

I sure would like a new clutch for my truck. I have a 2003 Dodge 5.9 with the NV4500

Count me in! 2003 Dodge, NV5600. No mods.

sing me up

2001 f-250 auto 7.3l

wow, 2 cool, How will i ever decide which applicant gets the free clutch for the give away, guess i'll have to let Steve throw all the names in a Texas style hat a draw one. Remember proper installation and break in are required.

Tex
Dan Vallance
Valair Inc.

count me in my truck is in the sig. 72,000 miles of hard pulling will probably need one soon.

I am very interested in this give-a-way! I run an 05 Ram 2500 5.9L Cummins, with a Triple Dog downloader/outlook monitor combination. I have an AEM Brute Force air intake and an Aero Turbine exhaust. I also have installed an FS-2500 bypass oil filter and am running Amzoil 5W50. I should also mention that I foolishly have a stock tranny in every respect.

The problem is I'm afraid to really see what my baby can do because I'm afraid of transmission problems. This would go along way toward providing me some confidence.

Just to give myself a modest edge.......(ahem).......Since you desire to have a review written of your product, I would like to (ever so modestly) mention that I have had a number of technical articles published in a number of journals as part of my PhD work. (Translation: I know how to write a fairly interesting, yet accurate sentence) If this gives me even the slightest edge then please consider this valuable skill in your decision making. If it doesn't help at all.....well....uh....just forget I mentioned it.:o

sign me up!

Count Me In ,,my Other Truck Is A 2006 3500 Dually ,,,good Luck To Everyone

Id like to be counted in also. My 06 3500 dually with the 6speed is in need of a fly wheel so Im going to have a clutch and throwout berring installed while Im at it. A local shop, not dealership, is going to do the work so all could be documented. The truck is stock, but is used for pulling trailers alll the time. 130,000 miles so far and i have had it just under a year. The truck sees most of its duty through IL, IN, IA, WI, MN, TX, OK, AR, KY, WV, PA ,OH ,TN ,MI, CO, AZ, NM, and CA so a wide range of temps and terrians and road conditions are seen by the truck. The trailers vary from my goose necks 38' and 27+5', usually gross 27k, to one of my small bumper pulls, and a varity of boats and campers through out the year. If I meet the criteria please consider me.
Thanks,
Sam

how do you sign up? truck just got paid off thanks to deployment in persian gulf, time to bomb it.
2005 2500 Dodge Cummins
nv5600
Edge Juice (hot), 4" straight pipe, self modded cp3, AFE Brute Force intake. twins and fass system in june, maybe injectors if the wife is in a good mood. :rolleyes:

could use a free clutch.
have good digi cams and a 10k hoist to do it on.
truck would be a 93 turbo 7.3L ZF5. truck needs flywheel also.

count me in wont be long my 04 will need one


I'm with you fellar's!
O' Brother where art thou

count me in waytogo

Well, it's almost over by tuesday TowRig should have picked a winner, once he fowards me the information i will contact the lucky winner and hook'em up. From everybody at Valair Inc. Good Luck to All :)

Tex
Dan Vallance GM/VP
Valair Inc.

Well, who's the lucky winner!!!!!!!!!!!!!!!!!!!!!!! :) :) :)

Dan Vallance
Valair Inc.