fabtoys
05-11-2007, 03:04 AM
I got an 06 f550 4x4 and when I need tires I want to upsiz fron the 225 70 19.5 anyone done this and what size before rear duals touch
Diesel Nut
05-11-2007, 09:12 AM
I had 265 70R19.5's on my 03 Dodge Dually. I am sure you can go to 245. Measure the distance between the duals.
Seventy4Blazer
05-11-2007, 09:02 PM
depends on how heavy you tow. you shouldnt have any problems with 245's and im sure you could go 265's, but again, it would depend on how much you weigh empty and with tounge weight on ya.
Grant
fabtoys
05-12-2007, 01:12 AM
on the dodge what width were the wheels ,according to Rickson gotta run a 6.75 wheel to run a 265 as for weight I use this with my 3 car hauler
Diesel Nut
05-12-2007, 11:35 PM
I want to say I had 8" wheels. I will have to look. Mine were 10 lugs with adapters. Loved them. I will try and find a few pictures.
Seventy4Blazer
05-13-2007, 07:58 AM
on the dodge what width were the wheels ,according to Rickson gotta run a 6.75 wheel to run a 265 as for weight I use this with my 3 car hauler
6.75 inch. they are just as wide as the rim. the 245's and 225's look silly on my rims...
fabtoys
05-13-2007, 09:44 AM
so you got 6.75 with 245 or 265 got pics
rocknbronco
05-13-2007, 06:14 PM
When I do my dually conversion I am going to move up to 19.5's myself of course I got a lot of work to do before that.
2007CUMMINZ
07-13-2008, 05:50 PM
Factory trucks usually have 6" wheels and 225s. I have 6.75" wheels on my 245s. I did lots of research and measured many wheels & tires before I purchased. I would have rather had 7.5" wheels. I have seen 245s on 7.5" wheels and they look REALLY good. The 245s on 6.75s still let the tread run flat. IMO the 6" wheels should only run 225s.
http://www.gorowan.com/2007ram/19_5_wheels/DSC_7313.JPG
http://www.gorowan.com/2007ram/19_5_wheels/DSC_7312.JPG
vBulletin® v3.7.1, Copyright ©2000-2008, Jelsoft Enterprises Ltd.