I have heard alot of good things about Goerend Brothers stuff on the net and if I had an auto that is who I would be calling if I needed a trans....
I am looking for the open carrier with spider gears only. I am going to weld the spider gears solid and use the carrier in a spare D80 housing I...
I am looking for a 4.10 Dana 80 open carrier for a D80 out of a 98.5 Dodge Ram. LS carriers won't work, I need an open carrier with the spider...
I drive alot of highway for work. I am a roving jobsite supervisor. I have a CB in my truck for a few reasons. 1. Weather Stations/Severe...
It is the diesel fuel injection pump on these trucks. Harley
Usually it is on the drivers side of the block above the oil pan behind the wiring harness. Sometimes it can be found on the passenger side of the...
Check the codes. I might be the death code for the VP-44. If it is then it costs $$$ to get it fixed. You should be able to get it for less then...
They are talking about adding a permanent gauge in the cab so you can monitor the fuel pressure all the time. The most critical numbers for fuel...
Having good airflow in and out is the key to keeping it cool. Do you have a 4" turbo back exhaust? If not that will help cool the system down. If...
from what I just read the crank sensor is on the block near the starter. Harley
A 1/2 ton tranny, rearend, & brakes are really not going to like that kind of a load. Get a 3/4 or 1 ton diesel and set it up to haul what you...
I bought a Carson 18' 7K trailer about 6 months ago and really like it. I have used it to tow my offroad truck around several times (3K miles) and...
You want your sender pre-turbo in your exhaust manifold. I have heard of guys hitting 1500* for short bursts while racing with no problems but for...
Here is a list. http://www.dieselspecialists.net/superchipspdf/0149AChryslerDTCReaderManual.pdf Harley
336= crankshaft position sensor 1690= crankshaft position sensor does not agree with ECM Crank sensor Sounds like you have a bad crankshaft...
You also do not want a 53 block truck. If the engine block has the number 53 cast into it STAY AWAY. The blocks tend to crack over time especially...
I run Autometer (FP & Pyro) guages in an A-pillar pod. I am running a Smarty for power adder right now. I will add some more later but for now...
I am feeding mine with a Walbro GFS system w/2 micron FF from Glacier Diesel Performance. It has worked great sofar for me. My pressures are 16psi...
I have not been home yet to see it in person but my girlfriend read my last oil analysis to me the other day. 13,500 miles w/ Amsoil 15w-40 &...
I have started doing Oil Analysis on my truck also. I am running Amsoil 15w-40 with Amsoil EAA oil filters. I am changing & sampling oil at 15K. I...
Separate names with a comma.