I guess I made a mistake in the engine size as he was takling about two vehicles at the same time> He apparently has a 4.0L engine instead of the 2.0.
Hi. My brother-in-law just bought a 2003 Ranger 4x4 with a 2.0 engine and says he gets very poor gas milage and was wondering what he could do to...
I would love to do it myself but I am somewhat handicapped and only have full use of one arm.
I have a friend who owns a muffler shop and he will probably just bend and weld the pieces as needed.waytogo
The only v903 I ever worked on was in the oilfield. They converted the engine into a huge high psi producing compressor. They changed the standard...
I run Bridgestone V Steel MIX LT235/85R16 10 ply grippers all around. They have been on the truck for 5yrs. and have not had 1 flat yet. They can...
I want to change my 3" exhaust to a 4". When you guys do it do you change the drop pipe right at the turbo or just connect the 4" to the 3" drop...
I found the answer to my question on another forum but thanks anyway. I still would like a answer to how to tell if waste gate is stuck...
On the back of the p7100 pump behind the AFC diaphram there are two screws holding a cover on what I assume is a adjustment screw of some sort....
I took the hose off and put regulated air to it and it doesn't seem to open till 20psi. The arm only moves about 1/4 of an inch. Is that enough?...
I listen to the oldies from the 50's and 60's and then classic country as a second choice. I can listen to almost any kind of music for a short...
Hi. Is it possible to have a waste gate stay partially open but still function? The reason I ask is that I put a restrictor in the boost line to...
I usually pull our 30ft Cardinal 5er which weights 12,000lbs. On occasion I have pulled 25ft goosenecks haulling broke down vehicles.:D
I like having 4x4 for the sake of the extra traction in winter. We sometimes have deep snow on the highways before the plows get it cleared. I...
Unless you already have the proper tools for adjusting the timing you are probably better off to take it to a shop that does this king of work as...
They are a fairly heavy engine for a pickup. They also don't like to be run hot and have a bad habit of pitting the oring boss for the liner and...
Yes that is where I have seen most of them mounted but isn't the #1 cyl the hottest running out of them all? If so why not mount it in the front...
I drove winch trucks years ago moving oil drilling rigs. I pulled 16 wheel jeeps with a 16wheel lowboy behind that and a load shift dolley behind...
. I agree about using just a sealant in place of a gasket. I have even used it as a valve cover gasket on a 429ci intercepter engine that I had...
I will be getting my guages in the next few days and I was going to install my pyro pre turbo like most of you people suggest. Does it matter...
Separate names with a comma.