Proper fuel pressure between filter housing and cp3

Discussion in 'Dodge 3rd Gen Cummins 5.9 (24v)' started by cowboy_cadillac, Feb 15, 2012.

  1. cowboy_cadillac

    cowboy_cadillac New Member

    Joined:
    Feb 10, 2012
    Posts:
    4
    Likes Received:
    0
    Location:
    Colorado Springs, Co
    Just curious, I am going with an aftermarket lift pump and will be using an FPR pre cp3. The problem is that I have found several recommendations as to what the FP should be set to. I am only running a power puck extreme and intake at the moment. Is 20psi too much?
     
    cowboy_cadillac, Feb 15, 2012
    #1
  2. brians06dodge

    brians06dodge New Member

    Joined:
    Jul 3, 2012
    Posts:
    1
    Likes Received:
    0
    Location:
    Charleston
    20psi should be fine to cp3. I am at 25psi to the cp3 and I run a airdog 165 fuel pump system.
     
    brians06dodge, Jul 4, 2012
    #2

Share This Page