Yep, its a piece of cake. I sure wouldnt pay a dealer to have this done.
x3 on the Prodigy. Best bang for the buck out there.
Have you turned the fuel up at all on it? Also, have you adjusted your wastegate to make more boost? I had a 94 IDI turbo, and it was an...
In order to insure that this never happens again. Buy a Sonnax kit from a place like www.blackclouddieselperformance.com to firm and quicken up...
Ive always had good luck with Autometer gauges from either Summit Racing, Ebay, or www.egauges.com
It sounds like turbo surge/stall to me. The fact that lifting off the gas then getting right back on it fixes the problem leads me to believe...
Do you have a boost gauge? You might be experiencing turbo surge, or stall. A boost gauge would confirm this. The fix is to get a wicked wheel...
Seems to me that all of the beds are pretty cheap these days, Ive had good luck with my Ford beds, but dont know if any of them are truly better...
A good use for the high idle position on a chip is for jump starting vehicles when you are by yourself. You can kick the high idle on and really...
The tach on those trucks is driven by a tach sensor located just ahead of the injection pump, and is screwed into the gear housing. It is common...
You definitely cant go wrong with the service and prices at SBC. The OFE is about the best bang for the buck clutch out there for the power it...
The AFC housing is held on by 4 bolts on the back/top of the injection pump. Inside it contains a device which limits fuel until a certain level...
What is that batt. for?
Ive had good luck with Advance Auto Parts balljoints. TRW and Moog both seem to make a good product, and Advance usually has the best prices.
Another vote for DP-Tuner, those guys really know their stuff for PSDs.
If it hasnt been said, check the AFC housing and star wheel settings. Slide the AFC housing back to the middle of its travel, along with the...
http://dodgeram.org/tech/dsl/valve_adj/12_valve.html
The only other problem with those mirrors aside from ripping the sheetmetal on the doors, is that it makes it extremely easy to put a big dent in...
If you look at the 6.0L forum over on www.thedieselstop.com you will find all the info you need about what programmers are safe to run, which ones...
You wont believe the difference in the Voyager and the Prodigy, no more dickin around with leveling out the trailer. Just set the boost level,...
Separate names with a comma.
