My pyro is post turbo, where Cummins (Cummins certified tech, 25 yrs experience) told me to place it. And thats with or without performance...
The lock and stich works, just make sure you follow the directions exactly.
My understanding is, the NAPA filters are made by WIX. If the stock filters are close to the same price of the NAPA. I would by the stock one,...
Cool!
I'd take a simple injector problem over a head gasket problem anyday.
I'd would bet that its the relay for the glow plugs thats bad.
Keep posting, were watching! :popcorn:
Everyone I have talked to said, they are great bug deflectors. No mpg gain to speak of. Otherwise you would see plenty of folks pulling RVs having...
COOL! waytogo
I pulled the check valve from the oil/cooler line, going into the cooler. As far as a 180 stat: http://www.scheiddiesel.com/index.htm Probably...
Bypassing the water/oil cooler will raise temps, its already been tried. I removed one of the check valves in mine and the temps dropped about 5...
Better to have the OD on, then the converter is locked up and the trans is running cool. Sounds like your ok to me. waytogo
Been a year so so since I last checked. But $500 -$600 a side (upper & lower) was the going rate.
It will give it more fuel without spending the $$ on a fuel plate right away. Before you move it, mark the original location. If you don't like...
Sounds like a hard spot in the ball joint, but hard to say not looking at the truck. My truck has one right now, already did the passengers side....
I'm with RJF. How do you do it CMJW?
"Shell Rotella not good to use in the cummins". Far from the truth! I wouldn't use anything else. Many folks using Rotella in the cummins.
Welcome aboard! *Former 6.5 towrig owner...
I know the MOOG parts last much longer and as far as the tie rods, Lukes Link!
Welcome!
Separate names with a comma.
