Dodge Cummins guys come together.

Fellow Dodge cummins owners,

Welcome to TRC! Feel free to post up who you are, where you live, what you drive, and the modifications you have done to your Dodge Cummins. waytogo Pics are welcome, infact they are insisted. waytogo

Willyswanter and I are your Dodge specific tech Moderators and feel free to contact us with any questions, concerns, or suggestions.

 

(Who I am) I'm Bobby Frobose and I live in Modesto California.

(What I drive) I'm the proud owner of a 2001.5 Dodge Cummins with the sport package, black leather, auto, and 4x4.

(Mods)I have a Stull Billet grille, bumper inserts, and shorty intenna. Thats it for mods for me. rotfl I'd like to do some engine and computer modifications but all in due time. For the moment I am happy and enjoying the stock power numbers.

 

Who I am: Jason Payne out of Bakersfield, CA

What I drive: 2003 Dodge SO 5 speed CTD Dually 4x4

Mods:
-AFE Pro-Guard 7 Intake System
-Banks 4" In-Line Exhaust Brake
-Magnaflow Turbo Back 4" Exhaust
-Banks 4" Turbo Down Pipe (replace stock cast iron restrictive elbow)
-Autometer Boost, EGT, Fuel Pressure Gauges

 

WHO I AM - Tom Russell all the way down here in Pensacola , Florida.

WHAT I DRIVE - Patriot Blue 2002 3/4 Ton Dodge 4x4
CTD High-Output 5600/241H.D. Dana60/80 4.10's
Camper Special / Towing Pkg / Snow-Plow Prep Pkg

WHAT MODS - Not much as of now - 315/75R16's BFG AT's
Auto Meter gauges Pyro / Boost / Fuel Pressure
Restacked clutches in rear T/L

** This is the best pic I've got at work, I'll look for better one tonight.

 

Whoa!!...Now there is a trailer full!....Cool! waytogo Do you wheel that crew cab?

My 3500 : Airlift rear bags, MBRP 4" exhaust, relocated breather bottle, Automter Sport Comp fuel pressure, boost, and EGT gauges on a triple pillar pod, Powr-Lok rear, 3.54's. On order : Scotty II and a Scotty Smartfuel kit. Bomb plans : MAD ECM - maybe stacked with an EZ (not sure yet) and a set of Don M's Mach 1.6 injectors. That will probably be it for fueling mods (I heard that before! ) as I would like to stick with the stock HX35 on this truck. That should be good for 350 RWHP and around 750+ ft/lbs - definately the limit of the HX35 (ok, maybe slightly past the limit...we'll see)

My 2500 : Custom ground #100 plate, 3000GSK, laser cut 191 DV's, 16* pump timing, honed 370's, 16cm non waste gated exhaust housing, MBRP 4" exhaust, Afe BHAF, Autometer Sport Comp trans temp, boost and EGT gauges, custom built auto w/BD X-converter and Transgo VB kit, lukeslinked track bar, Powr-Lok rear, 3.54's.

 

I wish that truck was mine ! That Crew Cab belongs to my partner in crime John Sweet ( NVRENUF to all the CK5 folks ). We were heading out to one of the Indy Jambories when that shot was taken.
That truck is his daily driver so it does not get beat on but it is capable - 4.56 gears, Detroit Locker, Etc..... just standard equipment every 4WD truck needs.

 

WHO I AM - Randy Harris and I'm in Denver, Colorado.

WHAT I DRIVE - Black 2003 Dodge Ram 2500 Laramie
Cummins H.O. 305/555 w/ 48RE Auto and MagHytec Pan 22mpg+ @68
3.73 Gears, Short Box, Quad-Cab


WHAT MODS - 2" Leveling Kit, LT315s, ElectricSteps, Edge EZ, Issapro EGT, Boost, TransTemp...Fuel Pressure soon. Access Tonneau...

Future plans call for B&W Turnover Ball, DTT 48RE overhaul w/ ChroMo Imput/Output Shafts as well as flexplate, TST PowerMax CR, stud-kit, w/ new valve springs/guides and a nice single Turbo or Twins with Scotty Air System...I should be divorced by then

 

Robbie,

I'm BurbinOR from CK5, sold the TPI K5 a couple of years ago, went to a Burb, sold it last year when my commute went from 5 minutes to 25 miles. Live in Gresham, Oregon.

Bought my '01.5 Dodge 2500 SBQC 10 months ago, never looked back. Getting close to 20mpg, put an Edge EZ on it, muffler deleted, BHAF monster, doing the 47RE upgrade on Monday. Then injectors, maybe a swapout to the Catcher ECM instead of the EZ. Should be enough (yeah, right!) but even what I have now is plenty of power.............what I love about the EZ is it is docile until you stomp on it, then hang on.

Oh, and straight piped is great unless you have the window's open and the loud pedal wide open.

 

Hi am Jeff Perkins same screen name over on CK5 (Stallion85). Just bought my first Dodge, very proud of it. Especially since all my friends are sweatin it!! rotfl

Anyways, got it for towing the K5 first off and wanted a tough truck for a family vehicle.

05' Dodge 2500

Cummins in-line 6 turbo diesel

4x4, SLT

Crew Cab with leather and power locks and stuff

Tow package

Can't think of anything else to mention you guys probably don't already know about on the rig.

Sorry these pic's kind of suck......

 

Who I am Scott Heiser, live in San Bernardino, Ca

What I drive 2004.5 Dodge Ram, CTD, quad cab, 4x4, long bed 6 spd..



Truck is an SLT, all stock for now, but tow mirrors and gauges are gonna be the first mods.. then a spray in bedliner of some sort...
Scott

 

Just another new guy

Hi all, just found this site and it looked pretty interesting. I filled out my truck info hopefully it will show up in signature or something, if not I'll see if I can edit this and fill it in. Anyway not to distant add ons will be dual 6" stacks, a TomTomGo 700 GPS and if I can get a custom overhead console built I'll finally add the CB and scanner. Nice meeting all of you waytogo

Truck info: 2001.5 3500 Q/Cab 4X4 Sport, 6 speed, HO, Loaded W/ leather. Buckstop w/winch, B&W Turnover Ball, Spray in liner, Lund Lunar visor and Power Moonroof. SPA gauges (Boost/EGT - Fuel press/ Oil Temp - Rear diff/Trans temp), Edge Comp tapped, BDIII's, KSB1B Turbo, CON FE, BD Brake, 4" dual exh, Air bulldog hood, Fast Coolers and RP. Preporator "Airdog" and some doo-hicky thingy's

 

I want pictures of that truck!!!!!!!!!!!!!!!! Welcome!

 

Welcome and ditto on the pics!

 

With that build up it sounds like your ready to rock'n'roll.

 

I just got a silver '05 SLT QC LB 4x4 2500, CTD, 48RE, premium cloth power drivers seats, Big Horn package, LS 3.73, and fold flat floor. When the parts get here they're adding Mopar power running boards and remote start.

 

Wheres the pics?

 

I have to take some. I know you're getting back for me asking the same in the '06 thread. :doah:

 

pic1(my rig) See also my sig.

pic2(where I live)A nice little town with only one stop light.

pic3(who I am) My name is Andrew Gillette and I'm 31 yrs. The dog is Scotch.

pic4(what I do) Heavy equipment operator for an environmental remediation co.

 

My Rig

Hi my name is Ben Kjellberg I live in Mounds View MN a northern suburb of St. Paul.

I have a 95 2500 4x4 CTD Snow plow prep 8ft Western, Fuel Plate, s&b air filter, Muffler delete, rebuilt transmission.

For what I do I am a network admistrator.

Pics https://towrig.com/photos/showphoto.php/photo/344 its all I have for now.

 

New CTD owner here. Just picked it up about a month ago, and I will never go back to gas